Forum: Max ATVs

So now I am getting more concerned. I thought this would be a fairly easy thing to do but the set screws worry me. Can you tell me for each axle...

I posted another message about how on my first water test for my 04 I had water leaking in. I regreased the bearing and it took grease pretty well...

I am happy to be able to contribute something... My 2004 IV with the 25hp Kohler came with RI Belt Marked Dayco 018039. Dayco's site's had a cross...

On my new to me machine one side seemed a little odd. It also seems to squeak during heavy turning so per many peoples advice I thought I would try...

After a losing battle with a broken set screw on the center sprocket,I had to cut the old axle to get it apart. I ordered a new axle and sprocket...

Today, Mudd-Ox, Inc. announced that they have purchased Recreatives Industries, Inc. For anyone not familiar with Recreatives Industries (RI),...

I see what folks meant here about the Max IV, it definitely feels unstable at first but then I got used to it and it seemed much better I also...

hey guys,,been reading the forums on greasing the fittings on the max.no need to tilt the engine or retap a grease fittingtry this,,pop the...

I do hope that this is the right forum to be posting this request for help from the members.if it's not please except my deepest apologies. My...

I need to change the clutch belt but not sure how to I have a 1996 Max4 18hp Vanguard

I ordered new chain adjusters the roller ones on the rear chains do they still go under the chain? And is it normal to have a bunch of slack on the...

Hello all, I've previously seen treads about this before but now I can't find them. I want to order a suspension seat for my max 4, but when I looked...

A few hours ago I was please to take delivery of a 2003 Max IV with few hours on it and in really great condition. It has a roll bar and winch...

Could anybody tell me what a fair price would be for a 1993 max IV. It runs well. It has a Kohler magnum 20, 26" tires, heated throttle cable, the...

I have read a lot of negative stuff about RR where is a good source to get parts ? I ordered the roller chain adjusters from RR for 195.00 did I get...

My wife and I went to spray down the chains, squirt grease in the bearings, and change the engine oil this evening. Spraying the chains was the easy...

I've been looking for one of these for a while after seeing a guy in Cincinnati make one into a tank for airsoft. He used a Max IV and fabricated a...

My max iv has an obvious townied up starting / stopping ignition system. Key switch to turn on and a push button kill switch. I believe the kill...

after doing some rough riding, I discovered I crack my tub near my middle axel on the bottom. After some research I found the best way to fix it was...

I dont have a title or registration for my max iv. Can anyone tell me if they are supposed to have one. Its about a 2001 or 2002 model. Also do...