Driven Clutch Spring replacement

[AJAX4321]

I need to replace my spring and slide buttons on my Comet driven clutch for my Max ll. Is a procedure available for this?

[dirtdobber]

Welcome to the site Ajax. Here is a video I found for you. This is slightly different from the Comet 780 setup, but the concept is the same.

https://www.youtube.com/watch?v=2JED-oeXc-U&t=162s

[AJAX4321]

Thank you dirtdobber. Much appreciated!

[msafi65]

The comet-Salisbury manual is on this site also. Gives a good description with pics. I put a piece of all thread rod through the clutch with nuts and washers to keep parts from flying when it comes apart.

[AJAX4321]

msafi65...Thank you for the information.

[racerone3]

I went overboard and built this same thing can be done with allthread as mentioned, or in a press. Red spring is very tough but most others can be done by hand on the side of the trail in a pinch

[AJAX4321]

Very nice..thank you.