Welcome to 6x6 World, the premiere website for Amphibious ATVs. Come join our family friendly forums, browse the member submitted photo gallery, thumb through brochures, and check out the how-to section. Argo, Max, Attex, Hustler, Terra Tiger, Mudd-Ox, and more 6x6 and 8x8 amphibious ATVs are inside!
-
- 0 comments
NATVA 6x6 Rules
Here is a copy of the National All Terrain Vehicle Association NATVA Rule Book from 1975.
...
-
- 0 comments
NATVA 1972 Grand Nationals
Here is the official souvenir program for the National All Terrain Vehicle Association's 1972 Grand Nationals. The Grand Nationals were held on June 2, 3, and 4 at the county fairgrounds in Monroe Michigan.
(click on thumbnails to enlarge)
...
-
- 0 comments
1972 NATVA Grand Nationals
Here is a list of the official results of the 1972 Grand Nationals:
... -
- 0 comments
NATVA
Here you will find literature relating to the National All Terrain Vehicle Association (NATVA). From old souvenir programs to the official rules for NATVA sanctioned races, all of the literature in this section was again submitted by the members of this site. -
- 0 comments
NATVA Rule Changes 1972 & 1973
Here is a list of the NATVA rule changes that went into effect on July 1, 1972 along with the ballet for members to vote on.
(Click on thumbnails to enlarge)
... -
- 0 comments
Three Lug to Five Lug Wheel Adapter
Here are some templates for making your own three lug to five lug (3 on 2" to 5 on 4.5") adapter.
Save some cash and show off your metal working skills
These are in PDF format so you will need adobe reader to view these. If you don't have it you can download it for free at Adobe
Here is the template that you use for a blueprint. It is to scale as long as you print it on an 8.5" x 11" piece of paper. (normal sized paper):
Three Lug to Five Lug Template H... -
- 0 comments
3 lug to 4 lug adapter
Due to the popularity of the three lug to five lug template, here are two templates for making your own three lug to four lug adapters. Be sure to download the correct one. One is a 3 on 2" to 4 on 100mm pattern and the other is a 3 on 2" to 4 on 4" pattern.
They are in PDF format so you will need adobe reader to view them. If you don't have it you can download it for free at Adobe Be sure to print the template out full scale on an 8.5" x 11" piece of paper. Then double check the m... -
- 0 comments
Salsbury Variable Speed Clutch
Salsbury Torque Converter shop manual second edition from the Salsbury Corporation out of Los Angeles, CA. This manual details the different kinds of Salsbury clutches along with instructions on how to disassemble / reassemble them. It also details how to tell when components are worn and what a properly adjusted belt should look like between two torque converters.
A color brochure on the Salsbury automatic torque converter that explains how the clut... -
- 0 comments
Mikuni VM Carb Tuning
Here is a 4 page article on the Mikuni VM series slide valve carburetor and how to tune it including some detailed carb jet information.
... -
- 0 comments
JLO 2 Stroke Motor
Here are a couple of helpful articles for the JLO engines:
(Click on the thumbnails to view the full sized image)
JLO Twin Cylinder timing procedures for models LR-340/2 (2F-340-1), LR-399/2 (2F-400-1) and LR-440/2 (2F-440-2)
Here are some wiring diagrams for the JLO engines. There are three different ones. The engine model numbers that they apply to are listed in the bottom right corner.
A complete JLO Service Manual: ...
There are no articles in this category.
Please log in to your account to view your subscribed posts.
Categories
Collapse
article_tags
Collapse
- 4x4 (1)
- 6x6 (2)
- 500 (1)
- amphibious (4)
- attex (1)
- atv (3)
- buffalo (1)
- buyers (1)
- buying (1)
- download (2)
- gotcha (1)
- guide (1)
- hustler (1)
- industries (1)
- inspection (1)
- manual (3)
- manuals (1)
- operator (2)
- owner (2)
- owners (2)
- parts (4)
- pre (1)
- recreatives (1)
- superchief (1)
- utv (1)
Latest Articles
Collapse
-
by Rabbit929This is on a 94 Max II 18hp Briggs and Stratton You will need: Grinder Welder I got all my parts from tractor supply. Parts List: -1/2x1x2 inch steel bushing (anything will work but the inside diameter needs to be 1/2in) -1/2in steel pipe (hollow or solid, you only need about a foot) -shift knob of your choosing, I haven't found a matching one yet. -2 1/2in inside diameter spacers/washers (the think ones) Start by cutting the cross shaft. I cut mine an inch and a half from the ...
-
Channel: Transmissions
10-31-2016, 05:36 PM -
-
by MAX IV MarkEvery time I go to start my Max in winter the throttle cable is frozen. I have a heated throttle cable but it takes about 20 min idling to get it free. I figured a good way to lube, purge the water and keep it from freezing.
I took a condiment squeeze bottle I had laying around and filled it with antifreeze. You could put your own mixture in it if you are worried about using antifreeze.
Removed the engine cover to get at the cable end. This engine is the 29 Kawasaki...-
Channel: Engines
01-01-2014, 12:32 AM -
-
by MikeBelow you will find PDF downloads of sections of the Argo Service Manual. This manual is Argo part number 673-04-1 from 2006. It covers a variety of Argo 6x6 and 8x8 ATVs manufactured since 1992 including the Conquest, Response, Bigfoot, Vanguard, Vanguard 2 and the Avenger.
...General Information Engine Electrical Brake / Steering -
Channel: Argo
04-19-2013, 05:37 PM -