Hey guys very new to the 6x6 world. Been riding dirtbikes and 4 wheelers for 25 years. Just bought my first 6 wheeler about 1 week ago a 96 Max IV, for 2000 dollars. Since then I've put the spare belt that came with the machine because the clutch wasn't opening all the way and there was alot of play. I've straightened the forward, reverse linkage so now it goes in gear much better going to adjust the chains tomorrow. Sprockets look good, there is no play in the bearings, 5 bolt solid axles, greased all of the fittings I could find. It already has a heated throttle cable. I'm going to put biggest tires on itI can, when I figure out what a good mud tire to use which will float and climb hills well. Im not real concerned with how fast it will go I like to climb hills and mud, if the 16 hp motor doesn't have enough torque to climb well I'm going to gear it down a little just a couple of teeth. I think I'm going to rebuild the trans before I take it to far since it hasn't been rebuilt yet. Any suggestions on where to get the best price on a rebuild kit would be great. Any Ideas on what else I should check out on the machine I'm open to suggestions or criticism of what I've done so far. Well my name is Adam and I live in Akron Ohio.