You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
while hunting i used my winch after i got to my duck blind the argo wouldn?t restart. I got a jumper pack and jumped it and got home.i then bought a battery installed it and with the key off the gauge is flashing. with the key on nothing happens.i replaced all circuit breakers and jumped the key switch and still nothing happened.I made sure the ground from the battery to the case was tight and clean. I also unplugged the winch and nothing still Any ideas on what I should try next. thanks
Check the battery is actually charged up to 12.2 volts at minimum. Check the connections again to make sure nothing got connected to the wrong terminal. Lastly check your engine oil as the low oil cutoff may have kicked in.
A few months back I had a similar issue with my ZTR, and the oil was just low enough that the protection kicked in.