Hustler outer bearings and flange

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Results 1 to 7 of 7

Thread: Hustler outer bearings and flange

  1. #1

    Hustler outer bearings and flange

    Please see video posted below. My bearings seem way too loose in the flange. I realize it is not filled with grease and not tightened down yet. Is this normal, or do I have a mis-match?

    Thanks,
    Clay

    https://youtu.be/r_oEEghx6xY

  2. #2
    Join Date
    Feb 2016
    Location
    Mississippi
    Posts
    1,108
    That's normal. When you tighten the flanges they will secure the bearing. Go to the parts store and get 6 o rings - that will fit the outer circumference of the bearing. It will help prevent water intrusion

  3. #3
    https://youtu.be/sjgzk3m-X_sI actually made gaskets for the inner and outer bearings. When placed inside the flanges, it actually made the bearing more loose than shown in the video. So much looser that I decided to not use them. Is this an error, or do the flanges need this gasket period? Sure is hard for me to use the gasket knowing it makes the bearings more loose inside.
    Last edited by DAGATOR16; 08-26-2022 at 12:54 PM.

  4. #4
    Join Date
    Feb 2016
    Location
    Mississippi
    Posts
    1,108
    Don't put a gasket between the flanges. Instead use a light bead of silicone. But do put a gasket and silicone between the flange and tub.

  5. #5
    Join Date
    Feb 2016
    Location
    Mississippi
    Posts
    1,108
    The inner bearing doesn't need any gaskets, orings or silicone.

  6. #6
    Thanks guys.

  7. #7
    Join Date
    May 2010
    Location
    Fairbanks AK
    Posts
    1,460
    I use 3M strip calk between flange ant tub and loctite liquid gasket between flanges.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts