You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
I know that a lot of folks on this site have been working on machines for along time. Does anyone have any experience working on old Subaru cars. I have a 87 gl wagon not running and I’m trying to fix it. I live in Florida and there isn’t anyone I can find locally that can help me. There ain’t many of these cars around down here. I hear they are mostly used up north. If any might can help let me know. Thanks in advance.
I have never worked on an Subaru, but the mechanical concepts are all the same. I (and others) need to know some history:
>Known problems at the time the car quit running?
>How long has it been sitting?
>Gas or diesel (I don't know if Subaru made a diesel)?
>What has been done so far to get it to run?
>What will it do toward running? (i.e., starter will turn the engine over, it cranks and runs but runs rough, etc.)
Of course, I assume your phrase "not running" means the engine won't run.
I am familiar with Subaru's but as mentioned above check the basics.
Spark? Fuel? Find out which one you are missing.
Or will it not crank over?
I will check back in on Monday. Away for the weekend.
My Subaru is the first year with fuel injection. The coil isn't firing kind the injector isn't working. So far I've checked all the fuses and swapped the distributor. I'm kind of leaning to a bad computer but I need more advice before I spend money on one.
Check the crank sensor. It may be in the distributer on those old models.
If there is no crank signal to the computer you will not have spark or injectors.
Going to see if I can find where its located and will get back to you.
OK checked and looks like the crank sensor is integral to the distributer.
Are the terminals on the coil accessible?
If so put a test light on the ground side. Crank engine. If the light doest flash I would suspect a bad crank sensor (distributer)
Posting Permissions
Reply With Quote