I am looking for a set of Attex Thunderchief Sprockets. I need them for a racer, please let me know if you have some. Thanks.
I am looking for a set of Attex Thunderchief Sprockets. I need them for a racer, please let me know if you have some. Thanks.
"Racing is life. Anything that happens before or after is just waiting."
Probably. I will be home next weekend...I think. It's been a lot of time on the road, but I will do my best to check on parts for you then.
l like to buy stuff and no I don't do payments!
If you have them I can drive up.
"Racing is life. Anything that happens before or after is just waiting."
Bump!
"Racing is life. Anything that happens before or after is just waiting."
Still looking for sprockets!
"Racing is life. Anything that happens before or after is just waiting."
If you can give me the # of teeth and the spacing from the bolt hole to the sprocket, I will see what I have.
If countrybumpkin doesn't have what you need, member whipper-ag can probably get/make them for you. He's done several for me.
Same here. I've got a big box of used sprockets, but they all start to look the same after a while. Maybe between the two of us, Dave and I can come up with a complete set for you.Originally Posted by countrybumpkin
Stuck in the seventies- not in the swamp.
(6) Attex, a Hustler, a Super Swamp Fox, (2) Tricarts, (3) Tri-sports, a Sno-co trike, 3 Dunecycles, and a Starcraft! ...so far
Thanks guys, I will have to go out tomorrow and measure the sprockets on my other machine because I don't have the correct ones to measure. I know the ones on my racer are 440 Thunderchief sprockets. That is what i am looking for. I will check them out and send the measurements in the morning. The sprockets are pretty much all that is left for my A stock racer. I didn't realize the sprockets that I had weren't going to work until recently.
"Racing is life. Anything that happens before or after is just waiting."
I measured the sprockets and this is what I am getting. (Everything is in inches)
Standing in front of the machine.
Front Right 2-1/4
Middle Right 7/8 to the small sprocket and 2-3/4 to the bigger sprocket
Right Rear 1-3/4
Left Front 2-1/2
Middle Left ¾ to the small sprocket and ¾ to the bigger sprocket
Left Rear 3-3/16
The two middle sprockets are the most important, if I can find those I can make it work.
Small sprocket 20 teeth
Large sprocket 26 teeth
Thanks guys!
"Racing is life. Anything that happens before or after is just waiting."
Posting Permissions
Reply With Quote