Busco Beach in NC October 10-12, 2014

[rickga]

1. Plumcrazy - we should be arriving Thursday afternoon
2. Toys4Me - same
3. NotFast - same
4. Mudd-Ox / Max crew
5. John Swenson aka Johnboy Va / MaxII w/half tracks
6. Fmints / 980 Hustler or MaxIV?
7. Dan67.. rest TBD
8. Lewis and Peggy 2011 Avenger
9. Cory / Max II
10.Normable1973 max4 and max2
11.Rickga Argo480
12.
13.
14.

[russriders]

. Plumcrazy - we should be arriving Thursday afternoon
2. Toys4Me - same
3. NotFast - same
4. Mudd-Ox / Max crew
5. John Swenson aka Johnboy Va / MaxII w/half tracks
6. Fmints / 980 Hustler or MaxIV?
7. Dan67.. rest TBD
8. Lewis and Peggy 2011 Avenger
9. Cory / Max II
10.Normable1973 max4 and max2
11.Rickga Argo480
12.Deedeelin1/conquest
13.
14

[lewis]

Just a tip, as we have seen in the past if you want to get a spot in the "F" section which is where the 6x6 members usually congregate near the shower house.... and plan on using power and water get your reservations in early. Under the old management this was no problem but the new owner require a reservation. If you plan on just primitive camping it makes no difference. Just thought I would give you a heads up.

Look forward to see all at this great event.

[Deedeelin1]

B

[lewis]

Like Jim said. It is just a little learning curve. This gang will have you moving around in the water in no time. By the way have you ever been to any of the 6x6 events or is this your first?

Lewis

[Deedeelin1]

B

[john swenson]

dee-dee, only 30 minutes from busco !! i would probably spend all my retirement funds on more machines, fuel and entrance fee if i lived that close. do they sell a yearly pass ? see you in oct. johnboy va.

[Deedeelin1]

Last time we checked price

B

[Dan67]

In the process of fixing the tires, been watching them go flat. so far tube in one could not fix bad side wall leak, the other three just leaking around the bead. Keeping ten pounds in them until we go out again. Saving my allowance for tracks, will be saving for a long time. See you in OCT.

Be very careful with tubes. Tires can spin on the rim and rip out a valve stem. If you really must use a tube in a tire until replaced, Spread grease inside tire before tubing to allow the tube to adjust to the tire as it bends and flexes. Glue tire to rim with permatex gasket sealant. On a tire with sidewall damage, fill in cuts and slices with silicone.

Best is to slim the tire. Don't skimp go full out 32oz. per tire and mix with anti-freeze. the air it to 5 psi and drive it to get the slim moving inside the tire.

Looking forward to meeting you at Busco.

[Deedeelin1]

Slim

B

[russriders]

. Plumcrazy - we should be arriving Thursday afternoon
2. Toys4Me - same
3. NotFast - same
4. Mudd-Ox / Max crew
5. John Swenson aka Johnboy Va / MaxII w/half tracks
6. Fmints / 980 Hustler or MaxIV?
7. Dan67.. rest TBD
8. Lewis and Peggy 2011 Avenger
9. Cory / Max II
10.Normable1973 max4 and max2
11.Rickga Argo480
12.Deedeelin1/conquest
13. John - Argo hdi
14. Andy , Ashton , Aiden, Avery - Argo
15. Hans - max2

[PlumCrazy]

1. Plumcrazy - we should be arriving Thursday afternoon
2. Toys4Me - same
3. NotFast - same
4. Mudd-Ox / Max crew
5. John Swenson aka Johnboy Va / MaxII w/half tracks
6. Fmints / 980 Hustler or MaxIV?
7. Dan67.. rest TBD
8. Lewis and Peggy 2011 Avenger
9. Cory / Max II
10.Normable1973 max4 and max2
11.Rickga Argo480
12.Deedeelin1/conquest
13. John - Argo hdi
14. Andy , Ashton , Aiden, Avery - Argo
15. Hans - max2

[PlumCrazy]

I'm have been running Slime and about 100cc of anti-freeze in all the MaxIV tires for a couple of years now, works great.

[wedge]

If all go's as Planned I will try and make this event ! Just waiting to pick up the machine !!!
I went to Humphrys back in the day and LOVED IT ! This meet is 5 hours from me so not to bad for a weekend deal. The wife Never seen one of these first hand let alone rode in one so this should be a GREAT Vacation for us, LONG Over due !!!!
Look forward to seeing you all there !

[Normable1973]

Well, I just picked up this camper top for Busco and other camping events(no more setting up tent ) just pump up mattress,open windows and turn on fan.. Not a fan of tents.. Can't wait to try it..... Norm