You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Hi Everyone, I have a Attex with a 400 JLO and a single Mikuni Carb in it. I have a brand new Mikuni pulse fuel pump (Rectangle type). The pulse hose is black rubber and I have located it where it has a length of 16" to 28" from the vacuum port. My problem is that when I take it for a drive after 10 minutes, gas is overflowing from somewhere on the carb - not sure where. At idle it does not happen. I have new floats and a new Needle valve and it still overflows. I have adjusted the float level several mm higher than spec and it still overflows. I am at the point of ordering a new carb. Does anyone have any ideas? What carb size would you recommend I replace it with? Thanks.