Took both Argos for a ride. One at a time.
http://youtu.be/TirFSM51bEA
http://youtu.be/RaOZl-gsxNU
http://youtu.be/XqfW85DxSGI
http://youtu.be/ZL-U-XRBWx8
http://youtu.be/q9Du8oGvGE8
http://youtu.be/u-iQao0NtdQ
http://youtu.be/4GOn9SVhsHk
http://youtu.be/C_RymG_3TRg
http://youtu.be/IdPx_CDrQJ4
http://youtu.be/Xtl5IcRY6-g
http://youtu.be/TQtVKWeSA34
http://youtu.be/VXtKm6GiXik
http://youtu.be/4O4Mk1UPPDs
http://youtu.be/Kc2SK3YJvr4
http://youtu.be/l0Lxvmb1ja4
1 Argo runs very well. I put a carb kit in one of them. Idles great but no power. Continue again today.
Did you get it sorted? Sounds like the gov. is limited on pull,not revs.Originally Posted by SteveReg
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.
is there a way of adjusting that? i see that there are 2 adjusting screws on the govenor lever. 1 is an adjusting screw fixed speed position 2 optional? the other is an adjusting screw variable speed position 1 standard. 1 only have this adjusting screw, not the optional one. maybe i need the optional adjusting screw? i did post another carb issue in a new thread in the engines forum i believe Jim.
Last edited by SteveReg; 03-28-2015 at 10:22 PM. Reason: added detail
The lower(pos. 1) screw handles the upper end speed it is standard and needed, if you feel it is not turning 3600 rpm you could come out 1/8- 1/4 turn at a time til you hit 3600 ( a tach is recommended). Top screw is useless as it is for a fixed speed unit. If you have carb. problems for certain, fix that first. In the video it seemed when you manually forced the gov over it picked right up.
Previously you asked about the gov spring, it should be in 2nd lower hole.
Post a pic of the gov. side up as none of yours show it well and the glasses on video move to much.
8 is damn cold to be working outside!
Last edited by ARGOJIM; 03-29-2015 at 07:43 PM.
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.
I will take some pics today. I will start it up and you can see the gov lever move. i need a tach. darn thing idles better than ever.
Posting Permissions
Reply With Quote
