My fan belt broke (MITSUBISHI BELT 59011-2056) on my 2005 Conquest and I?m simply wondering how best to access to replace? I?ve searched all over but can?t find any resources. Thanks in advance.
My fan belt broke (MITSUBISHI BELT 59011-2056) on my 2005 Conquest and I?m simply wondering how best to access to replace? I?ve searched all over but can?t find any resources. Thanks in advance.
Last edited by Kennyd; 02-17-2024 at 04:13 PM.
What engine?
What it lacks in ground clearance it makes up for with traction.
I have replaced the stator on one years ago and removed the radiator. Shop manuals are available on line that will walk you through most of those types of repair.
Thank you!
It’s been a long time but going off my bad memory I had to remove a radiator bracket and snake it in. I do know you need the exact Mitsubishi belt since there’s no adjustment. Tried a different brand with the crossover number and it was too loose.
What it lacks in ground clearance it makes up for with traction.
Thanks @tbone9! Sorry for the delay. Taking the radiator out and snaking it in was the play. Was pretty smooth sailing once I removed the rubber dampener.
It’s been a couple of months since I replaced the v-belt but it just broke again yesterday. Obviously that shouldn’t be happening after only a couple of hours tops of riding. Anyone have any ideas as to what might be causing this?
Thanks!
Kawasaki FD620D V-Twin 20hp liquid-cooled engine
Thanks!
Posting Permissions
Reply With Quote