need re-built t-20

[TalSet]

can anyone tell me if there is another source besides richard's for purchasing a re-built t-20? thanks for any help

[shane kearney]

whats wrong with the one you have.

[jpswift1]

I have a good rebuilt T-20 that I'll sell you for half of what Richard Clark charges.

[MaxRules]

Richard's T-20s are priced right for what you get. There seems to be different levels of "rebuilt" going on with some of these T-20s that are for sale online. I was once offered a rebuilt T-20 for $600. Seems like a good price until you find out it is "rebuilt" with only new seals and nothing else. There is over $500 worth of bands and bearings in there alone, plus figure an old used trans costs at least $400 to $600, plus the labor of putting the parts in by someone who actually knows how to do it. So, is it possible to get a rebuilt trans for less than what Richard sells it for? Sure it is, but you always get what you pay for one way or another.

[jpswift1]

Thanks for that information Brandon. I don't sell transmissions often, nor to make a huge profit on them. When I do put a rebuilt T-20 up for sale, it is the same exact thing as Richard Clark sells but half the price, so the whole "you get what you pay for" thing doesn't really apply here. It's true that some people might only do seals or something when they say a transmission is rebuilt, but when I rebuild a transmission I buy and install a complete T-20 rebuild kit from directly from Skid Steer Corporation (Recreatives). I only reuse the bands if they're in good usable condition, and I learned how to rebuild the transmissions by factory trained Recreatives employees, so you know it has been done right.

[vortechx]

Hello.
How much to completely rebuild a T20 Tranny?
Not sure if mine needs a complete rebuild but I need a cost idea.
Thanks
412 292 5183

[hydromike]

There is over $500 worth of bands and bearings in there alone, plus figure an old used trans costs at least $400 to $600, plus the labor.....

So, we're up to $1100 plus labor? Seriously?

...... plus the labor of putting the parts in by someone who actually knows how to do it.

http://www.6x6world.com/forums/content/251-rebuild-t20-skid-steer.html

http://www.6x6world.com/forums/content/244-t-20-skid-steer-transmission-rebuild.html

There. Now we all "actually know how to do it".

~m

[jerseybigfoot]

Ah what do we mean?????
"Rebuilt" Took it apart, looked good inside and put it back together. Should work for at least an hour, or at least long enough to say it wasn't due to the rebuild.
"Reconditioned" Took it apart replaced bad parts (subject to opinion) and put it back together. Probably work for a good long time. Sorry about the worn sprockets.
"Remanufactured" Took it apart, reused parts that were in spec, Replaced all worn parts and will work and last as long as a new unit. With a Warranty.

[amphibious drew]

Jpswifts work is good. I've been to the factory with him to get parts for him to get parts for a rebuild on my t20. I would buy parts and machines of him over richard any day of the week. I'm actually surprised he has a t20 available right now with how many project machines he's got going on.

[jerseybigfoot]

I'm sure JP does a fine job. I just want to illustrate a point about when people say rebuilt.