Largest Tire on Hustler 950

[AKhorseman]

Does anyone know what the largest size tires I can fit on my 950? It has 21's and I'd like to get some 25"s on her.

[highrollinmopars]

wildtexasranger runs 25" vampires on his. 25's are the max on a 950

[AKhorseman]

Thanks, That's what I was hoping.

[mudbug3]

wildtexasranger runs 25" vampires on his.

Wildtexasranger does'nt own a Hustler 950, but he does own two Hustler 980's. The forum member Brushcutter used to own a Hustler 950 with 25 inch Mud bug tire on it. The 25" inch Mud Bug's are a really tight fit on a Hustler 950 , with only about a 1/4 " of an inch of clearance over the front edge of the front tire and rear edge of the rear tire.

[jpswift1]

6X6World Boncrshr has a Hustler 950 with 25x13x9 Super Swamper Vampires and Jerseybigfoot has a 950 with 25x12x9 Goodyear Rawhide III's.

[highrollinmopars]

Wildtexasranger does'nt own a Hustler 950, but he does own two Hustler 980's. The forum member Brushcutter used to own a Hustler 950 with 25 inch Mud bug tire on it. The 25" inch Mud Bug's are a really tight fit on a Hustler 950 , with only about a 1/4 " of an inch of clearance over the front edge of the front tire and rear edge of the rear tire.

Mayby but he has a ton of videos on youtube of a hustler 950 with 25 vampires I assumed he owned it since he was postin all the videos.
Hustler 6x6 part 21 - YouTube

[brushcutter]

I'm fairly certain that is boncrshr's 950, Mudbug shot the vid, but due to some problem with his inet, he posted them using WTR's pc/info. Yes I did have 25" bugs on my 950, awesome in the mud. They were tight, but the only spacing I used was to slip over-sized nuts on the wheel studs between the rim and axle flange.

Whatever happened to Boncrshr? Haven't heard anything from him in a while. He and Sandcassle did some riding together down on the Tx coast, I remember seeing some video of it. Haven't seen anything out of him for a while either, and the phone I had his # on crapped out and took his info with it, stupid phone. Good guys, Boncrshr's chain tensioners were what I modeled mine after, they worked great.

[Noel Woods]

I think Boncrshr found another way to spend his time and money. Its been a couple years+ since I heard from him. Thats too bad because he was a great guy and had a very capable machine, and wasn't affraid to push it.