Forum: Argo ATVs

I have a 2000 bigfoot. The double chain from the centre wheel to the front wheel is so thight that it has not play at all and squeeks. The tensioner...

Does anybody have any experience with the Argo bucket suspension seats vs the standard bench seat. Especially as I all get a bit older, I here the...

While out scouting potential new hunting ground, the front end found a narrow but very deep creek. If there's a good side, it was the fact it was...

I got a message that my Buddy was broke down on the trail, and wanted some help, so Off I went. He was about 8kms from his truck, which actually was...

So, I just returned to civilization and thought I would post a bunch of Argo Pics:cool:. Sit back and enjoy, there's a lot of them:

What is the best thing to use to seal the bolt holes, axle holes, etc when putting an argo back together? There's some kind of black rubber between...

Hi, just wondered if the avenger and avenger hdi oil filters are the same, are the air filters the same too? I'm not at home but I want to order...

Am I to assume the engineers who designed the greaseable outer bearings in combination with the spacers did not ever plan on greasing their machines?...

Hi guys, I own a 1996 response argo and been around argo's all my life, but i recently bought a 1983 argo and it has a KT17 kohler motor, i went to...

I fired up the Argo this afternoon to check the fluids, battery, air pressure, etc. When I turned the key, the LCD display flashed the battery...

so ive got an oportunity to buy a 2005 Centaur for 10k ,just wondering if the centaur is all it is hyped up to be ?? any words of wisdom from Centaur...

I was installing a switch for my Brake Fan last night. After dropping it down in the tub and having to remove my battery just to find the stupid...

Anyoone know what the chances are that ARGO puts an EFI on the 650 engine in the next year

Well, I had to tell someone as my wife is less than interested in the new machine. Thank you to junkman/mudbug and others for all the advice. The...

Hey guys I have a magnum with kohler engine, everything is good for about the first 5 turns then the problem is that when I try to turn the revs...

How difficult is it to replace the fuel line from the tank to the fuel pump ? Are the clamps with in reach or is this a case of put the new line in...

So, Im about 10 pages into a search and haven't found what im looking for on building a rack. Moose season is about a month and a half away its time...

One of the prongs on the firewall broke off and I had to jury rig it to get home. Can I just weld a new prong on, or can I replace the whole firewall...

Any ideas? Started it up and cant shift into low or reverse. Just bought this with only 40 hrs on it.