Forum: Transmissions

Who wants to do a rebuild on the sight I don't have time to do it lol

What can I use for the band adjustment tools since I don't have a set what thickness are they and what can I use I took apart my trans and you can...

What is considered a good deal state side on new bands,and are they all the same there is a fella not far from me advertising brand new carbon lined...

Hey Guys, I was wondering if you can use newer T20 cases and place older T20 parts inside.Any help would be great !!!

my t20 seems to have dropped into frame slots any advice

Help. My 2000 max iv trans shift bars that connect to shifert diamonds are they supposed to be kinda bowed out or straight cause mine are like on a...

Hi. I got my 1986 hustler up and running, finally. I noticed that the upper (vented) fill plug keeps leaking. What could fix that? Will one of my...

Bought a new belt and when revving in neutral the belt still is about 1 - 1 1/2" from the top of the pulley. My question is the clutch somewhat...

Hey guys, Rebuilt the tranny in my max 4 someone had gear oil in it. Cleaned it all out . One of the bands had the material separating so I replaced...

My max iv has 177 hr's on it I've changed the fluid in my t20 on the drain plug it has some grayish sludge looks like bans material and some metal...

Hi guys. I have a larger diameter secondary clutch than the factory one that came with the Max Iv. Is there any benefit to using this over the...

Hi guys. I am in the process of upgrading the primary clutch spring. I have removed the snap ring from the back of the primary clutch. The halves...

In my 2000 max iv I have 177 hrs on when and how do I go about adjusting the bands in the t20

Hello everyone! I will start by saying that I'm a little more than frustrated at the moment with the T-20 that resides in my Hustler! I had an...

This post makes it sound like I got a Duck on board. But, my clutch, when you first throttle up on my B & S 23 hp the clutch clacks a little. It runs...

Tearing into the magnum over the last few weeks has led me to taking apart the clutch. I've had my fair share of clutches apart, and the powerbloc...

My Max IV is repowered with a oversized Comet Clutch,and a twenty four h.p. Motor. Honda. Just having fits with the shifter popping out. My personal...

HI gang, so, seems I read somewhere, that the t-20 can be modified to go forward and reverse with just stick direction, and without shifting the...

during this rebuild on my 83 max2 the driven pully stayed open after reven up the motor it is stuck open is this a bad spring? just have to fix one...