Forum: Transmissions

2000 max4 had 18 hp vanguard just changed to a 23hp vanguard, Total t20 trans rebuild, red spring, and chains. Here's the problem the mechanic just...

I'm making progress on my Newt The Bold project, Got the engine running pretty good, but as you all know, progress brings other problems into light....

I've tried searching drive clutch, and red spring and having no luck on how to disassemble and put in a red spring. I just want to make shure bolts...

I have read where guys are reinforcing the t 20 trans we are doing a rebuild now so why it's out we might as well put it back in with all the bells...

I pulled my non leaking 7000 out to service lube and check the pucks. Drained and refilled the trans. put back and now it drains out clutch side like...

Can I hear some pros and cons changing from original spring to a red spring. I only use the machine at very low speeds we trailer it to the job. The...

I am building a totally mount and set up for my StarCraft and wanted to Split shift it. I saw some where on her s a set up that was mounted to the...

Can you all tell me where I can get a clutch to fit an 1.1/8" crank ? Are the Kohler engines in the new Max 1.1/8" output ?

I'm ordering a t20 trans seal kit and left and right bands from 6x6 parts. Do I need 2 right bands at $85 per and 2 left bands for the same or just 1...

I have a diamond shifter out of a t20 that the pin had a flat spot. I removed the pin and have a replacement but it is loose enough to slip out of...

who do i buy my t20 trans rebuild kit from

Ok fellas I talked my buddy into buying an old max 340T and he's telling me that when machine in neutral on the lift the clutch side turns real hard...

OK...the crossover I traced down was a epic failure....so I'm going to measure the belt I need out myself...these are my questions...with the engine...

Hi, our Max IV needs an overhaul. Its now at 400 hours. How long does the output shaft bearings last, generally speaking? Should I trade them out...

Hi I'm looking at a max ii the man that has it says it leaks out of the right side clevis hole and it does not steer right that well because of...