I took a condiment squeeze bottle I had laying around and filled it with antifreeze. You could put your own mixture in it if you are worried about using antifreeze.
Removed the engine cover to get at the cable end. This engine is the 29 Kawasaki.
Loosen the screw and the nut and pull the cable off the engine. Then push the cable into the squeeze bottle.
Push tight against the outer cable housing and squeeze.
You will see the water purge out and then your lube. It only takes a couple of minutes to do this and would probably be faster if you have a friend work the throttle back and forth while you squeeze the bottle.
I probably have a least 100 new bottles like this laying around. I will give some to Jeff and Drew and we can give them out to whoever wants one.
ISO Tru Trax Links - Standard Size
Hello,
fornarog 09-12-2024, 07:29 AMI'm looking for some links for my Tru Trax. Apparently the company went under.
I tried to use the Argo links, but the hinges do not line up.