You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
I'm planning on stopping in on Saturday to visit everyone and deliver a winch frame to Jim C. I have yet to replace my van for towing and lodging. I'll be in Andover, all my toys are...
I have been in correspondence with several people on this issue (including Andy/Andrew at sales@maxatvs.com) , and so at times I forget who I have informed and who I have not.
...
You stated that you have power issues. Maybe if you could elaborate on that someone may chime in.Exactly what is it doing of not doing?What are the symptoms? When does it do it?
After over 5 days and over 800+ views and no response, I gambled today, and used my above checklist and attempted replacing belt. It was not easy, mostly because of my age and portly belly, but I...
Well, I finally got this little project started. I think everything is going to work out good, but there is still some testing to do. I ran into a couple little issues, but nothing that can't be dealt with.
Sorry about the length of the vids, it was hard to keep the time down on a project like this. I have only uploaded the first part so far, but PT-2 will be edited into this post tomorrow if possible.
I have to say here that I'm NOT SURE if this will work with ALL Conquests. I have noted that some older Conquests have different Bearing Extensions. Mine has the ones that require both the inner and outer bearing retainer when mounting Bearings in the bearing extensions. Some Conquests bearing extensions have the inner bearing retainer built into the bearing extensions. It may work, it may not. To find out what you have, look at your machines front/rear bearing extension assemblies. If you only see one gasket behind your outer bearing retainers, you have built in INNER bearing retainers. If you see 2 gaskets with a plate between, you have the same assemblies as mine.
Hello Shawn, I'm planning on stopping in on...
Hello Shawn,
JoeMeg 10-08-2024, 09:42 AMI'm planning on stopping in on Saturday to visit everyone and deliver a winch frame to Jim C. I have yet to replace my van for towing and lodging. I'll be in Andover, all my toys are...